I finished connecting all the rear lights. I'd covered all the wires with self amalgamating tape but I decided it would be better to cover with plastic split tubing. Even with the plastic covering I was concerned about it going past the edge where the rear arches join the main tub. The solution was to use large P clips. The wire can then be tie wrapped to the P clip:
Tested all the lights: sidelight, indicators, brake (I had to do this by shorting out as I've not connected the brake connector at the front), fog and reversing all working. Here they are with the hazards and sidelights on (only took 3 attempts before I got the picture with the hazards illuminated):
Posts
No comments:
Post a Comment