I got plates with the GB flag off to one side. For the front they were quite a bit wider than the nose so I trimmed off the GB part and also took a bit off the upper part to fit nicely under the nose. They were fitted using a couple of black plastic number plate mounting bolts. With a long extension on the socket set I was just able to fix without having to take the nose off.
The rear didn't need any trimming but getting to the back to hold the nuts was a nightmare. I thought I'd have to take the wheels off to get access but in the end by jacking up the rear, the suspension lowered giving me just enough room to get my arm in.
Posts
No comments:
Post a Comment