Rear suspension bolt tightening

All through the build manual it says not to tighten up the bolts as these will be done during set-up stage. This makes perfeect sense as I've lost count of the number of times I've had to take something off to get at something else. Having said that with the body coming in a couple of weeks and most things on the chassis, I decided it was the time to torque up some of the bolts. I did all the ones on the chassis end of the suspension. These would be difficult (impossible in some cases) to get to after the body was on. Also, they are not involved with the set-up.

The 3 bolts that hold the upper diff bracket & upper wishbones:


The 2 bolts on the inside of the lower wishbones: