Sunday 27 July 2008

Fitting body panels - More drilling & trimming

Continued to drill holes:
- LH and RH front inner tunnel footwell panels
- RH (driver) front bulkhead panel
- LH exterior panel
- top scuttle panel

Did the trimming of the RH tunnel side panel. I was concerned about how neat it would be after the trimming but I found that with a fine blade on the jigsaw I got a very clean cut:


this was so the panel didn't protrude below the chassis:


Trimmed the rear panel:


and some of the smaller front panels need adjustment as well:

No comments: