I soldered the wires of the new unit to the old wiring, covered with heat shrink then re-covered with fibregalss:
All working now:
Tuesday 20 December 2011
Indicator Replacement
The n/s indicator repeater on the cycle wing was only half working. One of the LEDs had gone so I have to replace the unit. The shame was I had fibreglassed the wires in place.
I soldered the wires of the new unit to the old wiring, covered with heat shrink then re-covered with fibregalss:
All working now:
I soldered the wires of the new unit to the old wiring, covered with heat shrink then re-covered with fibregalss:
All working now:
Subscribe to:
Post Comments (Atom)
Posts
No comments:
Post a Comment