Bit of a nightmare here...
With the constant adjustment of the dash postion I found the n/s end was short. Luckily I had kept the off-cuts so I was able to stick a bit back on.
First I filed both end so I got a perfect match. I was concerned about the extra thickness not allowing the dash to sit flat against the scuttle so I removed a bit of thickness of the fiberglass at the back, I superglued together to hold in place temporarily then fibreglassed at the back.
The result was an almost perfect extension. You can see the join if you look for it, but no one has seen it unless it's been pointed out to them:
Posts
No comments:
Post a Comment