*** CORRECTION - PLEASE SEE POST "BRAKE PIPE CLIPS" DATED 5TH OCT ***
I found a problem when coming to fit the 2 rear brake pipes. The brake clips I have seem to hold the pipes quite a long way away from the frame of the chassis. This means that if the pipes ran along the top of the chassis member, they would interfere with the fitting of the suspension arms. I decided to run them along the inside of the chassis member as from all the build pictures I have seen there is nothing in the inside that they would foul. This meant they had a couple of extra bends in them but nothing too intricate.
Subscribe to:
Post Comments (Atom)
Posts
No comments:
Post a Comment