When I fitted the covers that go over the top harness mounting points I made a bit of a mess. In my defence the manual didn't help. It said cut the end off so that is what I did. The net result was they started to fall apart, fraying from the cut end. All very unsatisfactory. I considered sewing up but in the end decided to order a new set from Westfield and cut differently avoiding the hems. The nice guys in the parts department sent me a new set free of charge.
The replacement set were slightly different to the original. They had a slot pre-cut in them. That saved me wondering how to cut them differently to the last set:
Once on they looked a lot neater:
Posts
No comments:
Post a Comment