There are a couple of possible bolt holes at the bottom. I fitted to the rear most hole. I assume the one further forward is for some other type of belt, e.g. inersia reel:
Monday 14 September 2009
Fitting Harnesses
I had a problem fitting the harnesses. The thread on one of the eye bolts provided seemed to be a bit small. When I was tightening it (not that hard!) it jumped the thread in the hole. The thread is 7/16" so I tried a spare bolt from the suspension. It seemed to be fine so I got Westfield to send me a new eye bolt (see "IVA bits from Westfield" post). That seemed to fit fine:
There are a couple of possible bolt holes at the bottom. I fitted to the rear most hole. I assume the one further forward is for some other type of belt, e.g. inersia reel:
There are a couple of possible bolt holes at the bottom. I fitted to the rear most hole. I assume the one further forward is for some other type of belt, e.g. inersia reel:
Subscribe to:
Post Comments (Atom)
Posts
No comments:
Post a Comment