These fitted great but the heads were ~13mm across and my countersink bit was only 10mm. Mike managed to borrow a larger countersing bit:
It all looked very neat when finished:
Tuesday 31 March 2009
Handbrake mounting
I was going to use standard M8 bolts (not like M6 as it says in the manual) but that would make a large buldge under the carpet on the LHS. A couple of builders have used rivnuts but I'd already drilled the holes. Instead I found some M8 X 70M coutersunk bolts on eBay for £2.90.
These fitted great but the heads were ~13mm across and my countersink bit was only 10mm. Mike managed to borrow a larger countersing bit:
It all looked very neat when finished:
These fitted great but the heads were ~13mm across and my countersink bit was only 10mm. Mike managed to borrow a larger countersing bit:
It all looked very neat when finished:
Subscribe to:
Post Comments (Atom)
Posts
No comments:
Post a Comment